湖州梁夹

所属分类：湖州夹具
点击次数：
发布日期：2019/06/20
规格：
类型：
在线询价

详细介绍

梁夹 Beam fasteners JYL-01A

特点

■用于槽钢在钢结构上的免焊接免钻孔安装；

■梁夹组件适用于多种标准的成品支架的T型钢梁；

■大夹扣厚度<36mm；

■材料:碳素钢,按照DNEN10025标准生产;镀锌工艺符合 ASTMA153标准,镀锌层厚度为56μm;达克罗;环氧喷涂。

■应成对使用,槽钢承载力需要予以校对,承载力值不适用悬臂支撑形式。

CHARACTERISTICS

■No soldering and drilling free installation of channel steel in steel structure.

■Beam clamp components are suitable for various of standard T steel beams.

■Maximum clip thickness<36mm.

■Material: carbon steel, according to DIN EN 10025 standard the galvanizing process conforms to the ASTM A153 standard, the thickness of the galvanized layer is 56um; dacromet; epoxy coating.

■Should be used in pairs, the bearing capacity of the channel steel must be proofed, and the value of the bearing capacity is not applicable to the form of cantilever support.

梁夹 Beam fasteners JYL-02A

特点

■用于槽钢在钢结构上的免焊接免钻孔安装；

■梁夹组件适用于多种标准的T型钢梁；

■材料:碳素钢,按照DNEN10025标准生产;镀锌工艺符合 ASTMA153标准,镀锌层厚度为56μm;达克罗;环氧喷涂。

■应成对使用,槽钢承载力需要予以校对,承载力值不适用悬臂支撑形式。

CHARACTERISTICS

■No soldering and drilling free installation of channel steel in steel structure.

■Beam clamp components are suitable for various of standard T steel beams.

■Material: carbon steel, according to DIN EN 10025 standard the galvanizing process conforms to the ASTM A153 standard, the thickness of the galvanized layer is 56um; dacromet; epoxy coating.

■Should be used in pairs, the bearing capacity of the channel steel must be proofed, and the value of the bearing capacity is not applicable to the form of cantilever support.

梁夹 Beam fasteners JYL-03A

特点

■用于槽钢在钢结构上的免焊接免钻孔安装；

■梁夹组件适用于多种多样标准的T型钢梁(翼缘板厚度<30mm);

■剪力载荷;

■材料:碳素钢,按照DIN EN10025标准生产;镀锌工艺符合 ASTMA153标准,镀锌层厚度为56μm;达克罗;环氧喷涂。

■应成对使用,槽钢承载力需要予以校对。

CHARACTERISTICS

■No soldering and drilling free installation of channel steel in steel structure.

■Beam clamp components are suitable for various kinds of standard T steel beams （The thickness of flange< 30mm）

■Bearable shear load.

■Material: high quality carbon steel, according to DIN EN 10025 standard the galvanizing process conforms to the ASTM A153 standard, the thickness of the galvanized layer is 56μm; dacromet; epoxy coating.

■The bearing capacity of the channel steel need be proofed when it is used in pairs.